Answer If you are using firmware versions 4.11.011 or earlier, it is recommended that when changing to IP address to do it separately from other configurations changes. In other words, change the IP address only and do not make other configuration changes until after the reboot. Also use the “OK to power down” button on [...]
- GR4 Firmware 4.14.011 Release
- Adept Systems Website Makeover
- 3. Conclusion
- 2.4 CN over IP Bridging
- 2.3 852 to 852 Bridging Router
- 2.2 IP LAN for high speed CN backbones
- 2.1 Multi-site building automation networks over an IP WAN
- 2. Applications of the CN/IP Routers
- 1.5 Configuration
- 1.4 852 Protocol Packets
Keep Up with Adept
709.1 852 address ahr expo awards bootloader browser Builconn building automation CEA documentation domain Ethernet features Firefox firmware flash GRouter3 GRouter4 headquarters i.Lon ILCS Internet Explorer IP addresses LNS LNS Server Lon/IP LonMaker LonMark LonMark Sessions lon over ip LonTalk online ordering press release range testing router routers store system requirements systems integrators upgrade upgrades web site website WiFi
© Copyright 1996–2012 Adept Systems Inc